Festool suction pad OFK500

This sole allows a vacuum cleaner to be fitted when the OFK500 is used to mill a small hole or bottom hole where the original suction screen cannot be used. the sole is mounted with the original screws. The sole utilizes the suction hole in the side of the OFK 500, so the suction is very concentrated around the milling iron. The suction nozzle is "tilted" to the side to give room to properly hold the OFK 500 while using the suction. The sole is designed to be used with a D27 hose.

In order not to lose milling height, the sole is only 5mm thick and a bit of caution should therefore be exercised when lifting and moving the machine - the weight from the hose hanger in the sole alone.