Fix 882 C998 22x2mm
Half-door spare (Lower part)
Lock case, not lockable.
The fitting rest acts as a lower part in a half-door
where the upper part in most cases is FIX 2152 / FIX
Can be delivered with both 25, 22 & 20 x 2 mm
Finishing glossy galvanized or yellow chromated.
Mandrel size 40 mm.
Locking depth 53 mm.
Supplied as standard with 2 side pistons and 1
end pistons of the wedge piston type.
The end piston is steered upwards through an outlet in
In the edge rail is a breaking track for a 90 degree bend
for the end piston, folded is 60 mm.
Can be ordered in special sizes according to own drawing.
Right & left are the same.
FIX 5145 piston plate is used as standard.
When the lower door half FIX 882 is closed
(the side pistons in operation, the end piston retracted) can
the upper door half opens (FIX 2152 / FIX 6152).
When the lower door half is to be opened, this is done
by twisting the lower fitting lever up horizontally
position (side pistons retracted, end piston in operation)
the whole door can now be opened and closed with the top
When the door is unlocked, the wedge piston and bolt are retracted.
The trap is in operation and holds the door in place
The upper door handle is horizontal and pressed
downwards when the door is to be opened.
If the door needs to be locked, do this by twisting the top
door handle upwards.
The wedge pistons come into operation and go out at the last moment.
The locking function is then performed with the key or
The bolt then comes into operation and is now with
the wedge pistons locked.